EasyManua.ls Logo

Haier AU282FHERA - Electric Wiring and Application; Wiring Configurations and Methods

Haier AU282FHERA
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7<
|B@@GA=75F=BA I=D=A; :=;GD9
< =89:
89: 89:
indoor 9
< =89:
indoor :
< =8 9 :
indoor ;
< =89 :
indoor <
< =89:
89: 89: 89:
outdoor
< =
indoor 7
< =89 :
indoor 8
89
:
communication wire with polarity
wired
controller
wired
controller
wired
controller
wired
controller
wired
controller
wired
controller
Yhe outdoor and all indoor units are in parallel through 8 non3polar wires4
Yhree wiring methods between wired controller and indoor unit@
F4 7 to multi .group control/@ one wired controller controls 8{7< indoors2 as shown in above figure2
indoor 7{indoor 8@ indoor 8 is wired control master unit2 the others are wired control slave units4
\ired controller and the master indoor .directly connected to wired controller/ is connected by 9
polar wiresA the other indoors and the master indoors are connected by 8 polar wires4
G4 7 to 7 .one wired controller controls one indoor/@ as shown in above figure2 indoor 9{ indoor
:2 indoor and wired controller are connected by 9 polar wires4
H4 8 to 7 .two wired controller controls one indoor/@ as shown in above figure2 indoor <4 Jither of
wired controllers can be set as master wired controller2 and the other is slave wired controller4
Raster5slave wired controller2 and master5indoor are connected by 9 polar wires4
\hen indoor is controlled by remote controller2 refer to the +wired control master unit5wired control
slave unit5remote control unit table+4F2 G2 H on signal terminal block need not wires and not connect
the wired controller4
Jlectric wiring and the application

Related product manuals