How to fix a Haier Refrigerator that is not cooling?
If your Haier Refrigerator isn't cooling, start by checking the electrical connection to ensure it's secure. A loose connection can prevent the refrigerator from functioning. Also, inspect the fuse; if it's broken, replace it with a new one.
Why is my Haier Refrigerator not cold enough?
If the inner temperature of your Haier Refrigerator isn't cold enough, first, make sure that the temperature selection is set correctly. If the compartment is overfilled, reduce the number of items inside. Also, ensure the refrigerator is not exposed to direct sunlight or heat sources. Finally, try to limit how often you open the door.
How to reduce unusual noises coming from Haier Refrigerator?
If your Haier Refrigerator is making unusual noises, ensure it is standing level. If it's not, adjust the leveling feet. Also, check if any part of the refrigerator is rubbing against the wall or other furniture; if so, reposition it. Note that the noise of flowing refrigerant can be heard during the interval of the stop and restart of the compressor and it's normal.
What to do if inner surfaces of Haier BC-50 are wet?
If the inner surfaces of your Haier Refrigerator are wet, it might be because the door is opened frequently or kept open too long; limit how often you open the door and avoid keeping it open for extended periods. Also, if you have a large amount of foods with high water content, dry the inner compartment thoroughly.
Why are the outer surfaces of my Haier Refrigerator wet?
If the outer surfaces of your Haier Refrigerator are wet, especially during the rainy season or in high humidity, dry the surfaces thoroughly.
General| Capacity | 50 liters |
|---|---|
| Energy Rating | A+ |
| Refrigerant | R600a |
| Color | White |
| Voltage | 220-240V |
| Frequency | 50Hz |
| Door Type | Single Door |
Guidelines for safely disposing of an old appliance and its components.
Essential safety precautions for operating and maintaining the appliance.
Guidance on temperature selection for different ambient conditions and applications.
Instructions for defrosting the evaporator when frost thickness reaches 3mm.
To Next Page
