Safety precautions
The refrigerator is operated through a 220-
240VAC/50Hz power supply. Abnormal
voltage fluctuation may cause the refrigerator
to fail to start, or damage to the temperature
control or compressor, or there may be an
abnormal noise when the compressor is
operating. In such a case, an automatic
regulator shall be mounted.
A dedicated socket with reliable grounding must
be provided for the refrigerator. The
refrigerator's power cable is fitted with 3-cord
(grounding) plug that fits a standard 3-cord
(grounding) socket. Never cut off or dismount
the third pin (grounding). After the refrigerator is
installed, the plug should be accessible.
Care for the power cord
Hold the plug, not the cord, when
unplugging the refrigerator.
Ensure that the power cord is not trapped
by the refrigerator. Do not step on the
power cord.
Take care not to roll over the power cord or
damage it when moving the refrigerator
away from the wall.
Damaged power cord
When the power cord is damaged or the plug is
worn, turn off the refrigerator and consult an
authorized service agent for replacement
If coal gas or other inflammable gas is
leaking in the vicinity of the refrigerator
Turn off the valve of the leaking gas;
Open the doors and windows;
Do not unplug or plug the power cords of
the refrigerator or any other appliance.
Unplug the refrigerator for the following
reasons:
Cleaning or maintenance;
Lamp replacement
Downloaded from Fridge-Manual.com Manuals
To Next Page
Loading...
Need help?
General
Weight and Dimensions
