EasyManua.ls Logo

Haier DW-86W100 - Proper Usage

Haier DW-86W100
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
828/100(220V~240V/50/60Hz) or 3mm for 628/100(115V~/60Hz), and the
extended.
or 220V~240V/50Hz and 220V~/60Hz for 628/100. A regulator with a capacity of
The appliance requires 220V~240V/50Hz for388/288/386/490/728/828/420
current for 20A for 628/626 (115V~/60Hz) and 16A for 628/388/288/386/626/100/
4000W or higher must be installed if the voltage if beyond the rated voltage of
10%. If the power cord needs to be extended, the extended conductor must
have a cross area of equal or greater than 2mm for 628/388/288/386/490/728/
2
2
Length must not exceed 3m.
Your Haier ULT unit is equipped with a standard three-prong power plug, rated
420/490/728/828 (220V~240V/50(60)Hz). Be aware that one of the three prongs
is for grounding purposes. Removal of the ground prong is strictly prohibited for
safety reasons under any circumstances. The electrical power plug should be
securely plugged into the power socket. A loose plug in the socket may cause fire.

Other manuals for Haier DW-86W100

Related product manuals