Care and cleaning
WARNING!
Do not replace the LED lamp yourself, it must only be replaced by either the manufac-
turer or the authorised service agent.
20
The lamps adopts LED as its light source, featuring low energy consumption and long ser-
vice life. If there is any abnormality, please contact the customer service . See CUSTOMER
SERVICE.
GB
Replacing the LED
-lamps
Replaceable (LED only) light source by a professional.
This product contains a light source of energy efficiency class F.
Notice
▶ If the water tank is not properly inserted ,water can drip from the connection.
▶ Do not use excessive force when removing or insstalling the water tank ,to avoid
damaging the tank.
Cleaning the water tank
1. Tank off the water tank out of the appliance.
2. Remove the cover (A).
3. Unscrew the dispenser spout(B).
4. Clean the tank and dispenser spout with warm wa-
ter and liquid diswashing detergent.Make sure all
soap is rinsed off.
5. Mount the dispenser spout (B),and take care that it
is firmly screwed to the water tank and the white
O-ring(C) is in position.
*Only for model HCR3818EWMM, HCR3818EWPT
and HCR7818DWPT.
Compartment Voltage Energy eciency class Model
HCR3818****
HCR7818DNMM
HCR7818DWPT
Fridge top lamp 12V F
Fridge back lamp 12V F HCR7818DNMM
HCR7818DWPT
To Next Page
Loading...
