24
Replacing the LED-lamps
Do not replace the LED lamp yourself, it must only be replaced by either the manufacturer
or the authorized service agent.
The lamp adopts LED as its light source, featuring low energy consumption and long
service life. If there is any abnormality, please contact the customer service.
See CUSTOMER SERVICE.
Replaceable (LED only) light source by a professional.
This product contains a light source of energy efficiency class G.
Non-use for a longer period
If the appliance is not used for an extended period of time, and you will not
Take out the food.
Unplug the power cord.
Empty and clean the water tank
Clean the appliance as described above.
Keep the doors open to prevent the creation of bad odours inside.
Moving the appliance
1. Remove all food and unplug the appliance.
2. Secure shelves and other moveable parts in the fridge and the freezer with adhesive tape.
3. Do not tilt the refrigerator more than 45° to avoid damaging the refrigerating system.
Do not lift the appliance by its handles.
Never place the appliance horizontally on the ground.
To Next Page
Loading...
