Equipment
GB
Energy saving tips
▶ Make sure the appliance is properly ventilated (see INSTALLATION).
▶ Do not install the appliance in direct sunlight or in the near of heat sources (e.g. sto-
ves, heaters).
▶ Avoid unnecessarily low temperature in the appliance. The energy consumption in-
creases the lower the temperature in the appliance is set.
▶ Functions like POWER- FREEZE consume more energy.
▶ Allow warm food to cool down before placing it in the appliance.
▶ Open the appliance door as little and as briey as possible.
▶ Do not overll the appliance to avoid obstructing the air ow.
▶ Avoid air within the food packaging.
▶ Keep door seals clean so that the door always closes correctly.
▶ Defreeze frozen food in the fridge storage compartment.
▶ The most energy-saving conguration requires the appliance keep drawers, food
box and shelves on factory-fresh condition, and food should be places as far as pos-
sible without blocking the air outlet of the duct.
The Light
The LED interior light comes on when the door is opened. The performance of the lights
is not aected by any of the appliances other settings.
32
To Next Page
Loading...
