Haier HMV1472BHS Installation Instructions

Before Rotation After Rotation
a
a
A
Back of Microwave
5. Gently remove the wires from the grooves. Reroute the wires through grooves
on other side of the blower unit.
Before Rerouting After Rerouting
a
a
A
Grooves
6. Roll the blower unit 90° so that fan blade openings are facing out the back of the
microwave.
Before Rolling
After Rolling
a
a
A
Back of Microwave
7. Using tin snips, remove the knockout plates in the back of the unit.
a
A
Knockout Plates
8. Place the blower unit back into the microwave.
IMPORTANT:
•
Make sure the wires are not pinched and that they are properly secured.
•
The blower unit exhaust openings should match exhaust openings on
the rear of the microwave oven.
19
ENGLISH

Haier HMV1472BHS Specifications

General

Brand	Haier
Model	HMV1472BHS
Category	Microwave Oven
Language	English