(8)
English
Installation Sequence
Before Starting this Unit
1. Select a suitable location, making sure you have easy access to an electrical outlet.
2. Install the flexible exhaust hose and adjustable window slider kit as depicted in Fig. 2 & 3.
Note:1. Step 2 is required only while using cooling or dry mode, in cooling mode you can
select to install two hoses or air outlet hose only, in dry mode you may install air
outlet hose only.
2. While running or installing the hoses cannot be blocked by curtains and so on.
3. Plug the appliance into a grounded electrical outlet. Please select an appropriate power supply basis
the nameplate.
Note: Do not use a regular extension cord.
4. To turn the appliance on, press ON/OFF button.
To Next Page
Loading...
Need help?
General
