English
8
Installation Sequence
Before Starting this Unit
1. Select a suitable location, making sure you have easy access to an electrical outlet.
2. Install the flexible exhaust hose and adjustable window slider kit as depicted in
Fig. 2 & 3.
Note: 1. Step 2 is required only while using cooling or dry mode. In cooling
mode you can select to install two hoses or air outlet hose only. In
dry mode you may install air outlet hose only.
2. While running or installing the hoses, the unit cannot be blocked by
curtains and so on.
3. Plug the appliance into a grounded electrical outlet. Please select an appropriate
power supply based on the nameplate sticker found on the unit.
Note: Do not use a regular extension cord.
4. To turn the appliance on, press ON/OFF button.
To Next Page
Loading...
