Need help?Do you have a question about the Haier HRF 276 and is the answer not in the manual?
General| Brand | Haier |
|---|---|
| Model | HRF 276 |
| Category | Refrigerator |
| Language | English |
Shelves slide out for convenient food loading and unloading.
Enhances rapid cooling and helps manage moisture inside the compartment.
Procedures for handling a damaged power cable to ensure safety.
Critical safety steps to take if flammable gas leaks occur nearby.
Guidelines for safely managing the external power cable.
Specifies necessary situations for disconnecting the refrigerator from power.
Avoid storing flammable, explosive, or corrosive items in the refrigerator.
Do not place electrical plugs, regulators, or microwaves on top of the refrigerator.
Do not use electrical appliances inside the refrigerator unless manufacturer-approved.
Avoid touching the freezer's interior surface with wet hands to prevent freezing.
Avoid swinging or applying excessive pressure to the refrigerator door.
Unplug during power interruptions or cleaning; wait before restarting.
Do not install the refrigerator near gasoline or other flammable items.
Avoid placing heavy or unstable items or water containers on top.
Disassembly, renovation, or cooling system maintenance require authorization.
Place the appliance on a flat, solid surface using stable, fire-resistant materials.
Ensure adequate ventilation and at least 10cm space around the refrigerator.
Position away from heat sources or direct sunlight to maintain performance.
Ensure the refrigerator is connected to a stable power supply.
Guide on adjusting the temperature knob for desired cooling levels.
Correlation between ambient temperature and recommended thermostat settings.
Detailed steps for setting the desired temperature between 1 and 7.
How to activate and deactivate the rapid cooling function for the refrigerator.
Cool hot food to room temperature before placing it in the refrigerator.
Ensure hot food cools to room temperature before placing it in the freezer.
Do not store hot food in the refrigerator until it has cooled down.
Troubleshoots issues like low voltage or disconnection of power supply.
Explains causes of excessive noise, such as contact with walls or uneven placement.
Discusses reasons for not reaching the set temperature, like door issues or external heat.
To Next Page
