Why is my Haier HSU-07HE03/R2 not cooling properly?
If your Haier Air Conditioner isn't cooling well, start by cleaning the air filter, as it should be cleaned every 15 days. Also, remove any obstructions from the inlet and outlet. Ensure the temperature is set correctly and close any open doors or windows. Use curtains to block direct sunlight and reduce heat sources or the number of people in the room.
What to do if my Haier Air Conditioner does not work at all?
If your Haier Air Conditioner doesn't work, check if the power plug is properly inserted and ensure there is no power failure. Also, check if the fuse is blown out.
How to fix a Haier Air Conditioner that does not restart immediately?
When your Haier Air Conditioner is stopped, it won't restart immediately until 3 minutes have elapsed to protect the system. Wait for 3 minutes before attempting to restart. Also, if the electric plug is pulled out and reinserted, the protection circuit will work for 3 minutes. Do not plug the unit back in immediately.
Why is my Haier HSU-07HE03/R2 Air Conditioner making noise?
The swishing or gurgling noise during operation or at stop is normal; it is generated by refrigerant flowing in the system. The cracking noise during operation is also normal and is generated by the casing expanding or shrinking because of temperature changes. However, if there is a big noise from air flow during operation, check and clean the air filter.
Why does my Haier HSU-07HE03/R2 blow out mist or steam?
During COOL or DRY operation, the Haier Air Conditioner may blow out mist due to the sudden cooling of indoor air. This is normal.
Why does my Haier HSU-07HE03/R2 generate smells?
The smells are generated because the Haier Air Conditioner circulates smells from the interior air such as the smell of furniture, cigarettes. Consider improving indoor air quality.
General| Brand | Haier |
|---|---|
| Model | HSU-07HE03/R2 |
| Category | Air Conditioner |
| Language | English |
Details the buttons and display functions of the remote control.
Explains how to use the remote controller for basic functions.
Details on performing cooling, heating, and dry operations with temperature settings.
Explains how to set ON/OFF timers for automatic unit control.
Detailed steps for setting both timer ON and timer OFF functions.
Procedures for emergency use and initial test operation of the unit.
Common issues and checks for normal operation phenomena like restart delays or noises.
Troubleshooting steps for common problems like no operation or poor cooling.
Table detailing reasons for trouble, phenomena observed, and remarks.
To Next Page