Haier HSU-12HEK03 User Manual (English)

Other manuals for Haier HSU-12HEK03

Questions and Answers:

K
Kimberly MackAug 8, 2025
Why is my Haier HSU-12HEK03 cooling poorly?
- K
  kadkinsAug 8, 2025
  Poor cooling in your Haier Air Conditioner can stem from several factors. First, check if the air filter is dirty and clean it, ideally every 15 days. Ensure there are no obstructions blocking the air inlet or outlet. Verify that the temperature is set correctly and that all doors and windows are closed tightly. Direct sunlight can also impact cooling efficiency, so use curtains to block it. Finally, consider if there are excessive heat sources or too many people in the room.
G
glucasAug 14, 2025
Why is my Haier HSU-12HEK03 making noise?
- G
  Gregory SandersAug 14, 2025
  The swishing or gurgling noise you hear in your Haier Air Conditioner is typically refrigerant flowing through the system. You might notice it more within the first few minutes after starting the unit. Also, cracking noises can occur as the unit's casing expands or shrinks due to temperature fluctuations. If you notice a big noise from air flow, the air filter may be too dirty.
L
Larry JacksonAug 20, 2025
Why won't my Haier HSU-12HEK03 Air Conditioner restart immediately?
- J
  Joseph OrrAug 20, 2025
  If your Haier Air Conditioner doesn't restart immediately after being stopped, it's due to a built-in protection mechanism. The system requires a 3-minute delay before restarting to safeguard the unit. If you unplug and re-plug the air conditioner, this protection circuit activates, preventing immediate restart for about 3 minutes.
B
Brian SmithAug 26, 2025
Why does my Haier Air Conditioner generate smells?
- O
  otaylorAug 27, 2025
  Smells from your Haier Air Conditioner can occur when the system circulates odors from the room, such as those from furniture, paint, or cigarettes.
J
James CunninghamSep 1, 2025
Why can’t I change the fan speed in dry mode on my Haier Air Conditioner?
- T
  Trevor BurnsSep 1, 2025
  In DRY mode, the fan speed of your Haier Air Conditioner cannot be changed because when the room temperature drops below the set temperature plus 2 degrees Celsius, the unit will run intermittently at low speed, regardless of the fan setting.

Haier HSU-12HEK03 Specifications

General

Type	Split
Cooling Capacity (Ton)	1 Ton
Refrigerant	R32
Weight (Indoor Unit)	8.5 kg
Weight (Outdoor Unit)	28 kg
Power Supply	220-240V, 50Hz
Cooling Capacity	12000 BTU/h
Outdoor Unit Dimensions (LxWxH)	700 x 245 x 540 mm
Air Flow (High)	550 m3/h

Summary

Split Type Room Air Conditioner Operation Manual

Parts and Functions Overview

Indoor Unit Components

Identifies and describes all parts of the indoor unit, including inlet, grille, and filters.

Remote Controller Identification

Details the functions and display elements of the remote control unit.

Outdoor Unit Identification

Details the components of the outdoor unit, such as outlet, inlet, and drain hose.

Setting the Clock

Step-by-step instructions for setting the current time on the remote controller.

Battery Installation Guide

Provides instructions on how to properly insert batteries into the remote controller.

Understanding Operation Modes

Starting and Stopping the Unit

Basic instructions for turning the air conditioner on and off using the power button.

Auto Operation Explained

How the unit automatically selects cooling or heating based on room temperature.

Cooling Mode Operation

Details and procedures for operating the air conditioner in cooling mode.

Dry Mode Operation

Instructions for using the dry mode for dehumidification and comfort.

Fan Only Operation

Guidance on operating the unit solely for air circulation without cooling or heating.

Heating Mode Operation

Details and procedures for operating the air conditioner in heating mode.

Adjusting Airflow Direction

How to adjust the horizontal and vertical flaps to control airflow direction.

Advanced Operational Features

HEALTH Mode Functionality

Explains the anion generator's role in air purification and improving air quality.

Setting Timer Operations

Instructions for programming automatic start and stop times for the unit.

Emergency and Test Modes

Procedures for manual operation and system testing when remote is unavailable.

Sleep and Power Management Features

Comfortable Sleep Mode

How to activate sleep mode for a comfortable sleeping environment.

Sleep Mode Behavior by Mode

Details sleep mode adjustments for COOL, DRY, HEAT, and AUTO operations.

Power Failure Resume Functionality

Explains how the unit automatically resumes operation after a power interruption.

Maintenance and Cleaning Guide

General Maintenance Tips

Advice on optimal temperature, airflow, and timer usage for unit longevity.

Cleaning the Air Conditioner

Instructions for cleaning the remote control and the indoor unit's exterior.

Air Filter Maintenance and Replacement

Step-by-step guide for cleaning, attaching, and replacing air purifying filters.

Safety Cautions and Warnings

Critical Installation Warnings

Essential safety advice regarding professional installation and preventing hazards.

Electrical Safety Precautions

Precautions related to power supply, cords, earthing, and avoiding water contact.

Operational Safety Guidelines

Cautions during operation like avoiding improper placement, airflow obstruction, and self-repair.

Troubleshooting Guide

Normal Performance Checks

Explains common noises, smells, and mist phenomena that may occur during operation.

Common Issues and Troubleshooting Steps

Guides on checking for poor cooling, fan speed issues, and other operational problems.

Ambient Temperature Cautions

Lists applicable ambient temperature ranges for different operating modes and units.

Related product manuals

Haier HSU-12H03/(BP)1

61 pages

Haier HSU-09/12HA103/R2(DB)

79 pages

Haier HSU-12HEK03 User Manual

Table of Contents