13
(4) Unit Stop
Press ON/OFF button.
Only time remains on LCD. All indicators on
indoor unit go out. Vertical flap closed
automatically.
Remote controller can memorize settings in each operation mode. To run it
next time just select the operation mode and it start with the previous setting.
No re selection is needed. (TIME ON/OFF needs re selecting)
Hints
Operation
14
Operation
Cool, Heat and Dry operation
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display.
(Not Timer setting)
Power indicator on indoor unit lights up.
AUTO COOL DRY HEAT FAN
(2) Select operation mode
Press MODE button for each press, operation
mode changes as follows:
Unit will run in operation mode displayed
On LCD. Stop display at your desired mode.
Recommendations: Use Cool in summer Use Heat in winter
Use Dry in spring, autumn and in damp climate
(3) Select temp. setting
Press TEMP. button.
Every time the button in pressed, temp. setting increases 1 C
Every time the button in pressed, temp. setting decreases 1 C
Unit will start running to reach the temp. setting on LCD.
o
o
(1)
(3)
(2)
(4)
To Next Page
Loading...
