PAGE 13 • SET UP & USE
ENGLISH
OPERATION INSTRUCTIONS
LIGHTING
All models come with an interior light located on
the ceiling of the refrigerator compartment. For
models with a single bulb, no cover is provided.
For models with dual bulbs, a cover is provided.
Some models may feature a light in the freezer
and/or a “mid-level” light on the back wall of the
refrigerator above the crisper. Please see the
Proper Care and Maintenance section for light bulb
replacement instructions.
REFRIGERATOR UPPER LIGHT W/ COVER
(NOT ALL MODELS)
To Remove Upper Light Cover (if included):
1. Push in the tab at the far end of the cover.
2. Rotate the far end of the cover down.
3. Push the cover toward the back of the
compartment.
REFRIGERATOR MID-LEVEL LIGHT (NOT
ALL MODELS)
To Remove Refrigerator Mid-Level Light Lens (if
included):
1. Push up on the bottom of the cover.
2. Rotate the bottom of the cover away from rear
of compartment.
3. Lift the top of the cover up and out.
FREEZER LIGHT (NOT ALL MODELS)
To Remove Freezer Light Cover (if included):
1. Pull the cover to the front of the cabinet.
REFRIGERATOR INTERIOR SHELVES
All refrigerator models include shelving that can
be adjusted to suit your personal storage needs.
Depending on model, shelves can be wire or
encapsulated glass, full-width or half-width.
FULL-WIDTH WIRE AND ENCAPSULATED
GLASS SHELVES
Can be adjusted to four different levels. These
shelves slide in and out by lifting the front of the
shelf and gently pulling it towards you.
HALF-WIDTH ENCAPSULATED GLASS
SHELVES
Can be set to 4 different levels and can be moved
independent of each other, giving you the widest
variety of shelving options. Keep in mind that
refrigerators with half-width shelving only have a
support track in the center of the refrigerator back
wall. Right-hand and left-hand shelves can’t be
interchanged.
To Next Page
Loading...
Need help?
General
