8- Care and cleaning
GB
24
8.4 Defrosting
The defrosting of the refrigerator and the freezer compartment are done automatically;
no manual operation is needed.
8.5 Replacing the LED-lamps
The lamp adopts LED as its light source, featuring low energy consumption and long ser-
vice life. If there is any abnormality, please contact the customer service . See CUSTOMER
SERVICE.
Parameters of the lamp:
Refrigerator compartment:12 V max 2 W
WARNING!
Do not replace the LED lamp yourself, it must only be replaced by either the manufac-
turer or the authorised service agent.
8.3 Cleaning the water tank
A
B
C
B
8.3
1. Take o the water tank out of the appliance.
2. Remove the cover (A) (Fig. 8.3).
3. Unscrew the dispenser spout (B)
4. Clean the tank and dispenser spout with warm wa-
ter and liquid dishwashing detergent. Make sure all
soap is rinsed o.
5. Mount the dispenser spout (B), and take care that
it is rmly screwed to the water tank and the white
O-ring (C) is in position.
6. Close the cover (A) and replace the tank inside the
appliance.
Notice: Water tank
▶ If the water tank is not properly inserted, water can drip from the connection.
▶ Do not use excessive force when removing or installing the water tank, to avoid dam-
aging the tank.
To Next Page
Loading...
