Use
EN
Super-Cool function
Switch on the Super-Cool function if larger quantity
of food should be stored (for example after the pur-
chase). The Power-Cool function accelerates the
cooling of fresh food and protects the goods already
stored from undesirable warming. The factory setting
temperature is 0 to +1°C.
1. Unlock the panel by pressing button “F” if it is
locked.
2. Press button “D” (Super-Cool).
3. Indicator “d” illuminates and the function is acti-
vated.
By repeating the above steps or selecting an other
function this function can be switched o again.
Notice
This function will be automatically disabled after 3 hours.
1. 2.
3.
Using water dispenser
(Water dispensing models only)
Ensure you have followed the steps outlined in “Be-
fore you start using the Ice and Water or Automatic Ice
function“ prior to your rst use of water dispenser.
Dispensing
Your water dispenser is designed for one-handed opera-
tion. To dispense water, gently press the dispensing pad
with a glass or container.To stop the ow of water, simply
pull your glass or container away from the dispenser pad.
Pressing hard against the dispensing pad will not increa-
se the ow or dispense more water.
WARNING!
To avoid damage to property or personal injury do not put hands, ngers or objects
up the dispenser opening.
Using ice maker (Ice and Water and Automatic Ice models only)
Ice On/O
Your ice maker is designed to automatically dispense ice into the ice storage bin below until it
detects the bin is full. The more ice you use, the more it makes.
First Use
The ice maker will be o when you turn your refrigerator on for the rst time after installation.
The light above the „Ice On/O “ icon will be o .
18
To Next Page
Loading...
