EN
Use
Water dispenser
With the water dispenser cool drinking water can be tapped.
The water tank should be cleaned before first use (see CARE AND CLEANING).
Filling the water tank
WARNING!
â–¶ Use drinking water only.
1.Ensure that the water tank is properly inserted
(see EQUIPMENT)。
2.Rotate and lift the round lid (A) and pour fresh
drinking water into the water tank (Fig.5.10.1).
3.Fill water only up to the mark (2.5 L); as it could
overflow when the door opens and closes.
4.Close the round lid (A) until it clicks into place.
27
NOTICE
1. The appliance quits "Super Cool function" after entering "Super Cool function"
for 6 hours or pressing key "K3" when the icon "E" (Super Cool function) is bright
or turn it off from the App.
2. In the state of Super Cool, if the temperature of the fridge compartment is
adjusted, icon "E" (Super Cool function) flashes to indicate that this operation
cannot be done.
To Next Page
Loading...
Need help?
General
