EasyManua.ls Logo

Haier HVW18 - Extension Cord Usage; Installation Location Limits; Door Adjustment Procedure

Haier HVW18
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLE SHOOTING
1. Normal Phenomena – Should not be considered as the trouble of the unit
a. Wine cooler does not operate
- Check if the unit is plugged in.
- Check if there is power at the power outlet by checking the circuit breaker.
- Check if the ambient temperature is lower than the unit’s pre-set temperature.
(Preset lowest temperatue – 10 degree C; Preset highest temperature – 16 degree C)
b. Wine appears too warm
- May be caused by frequent door openings.
- Cooling time is too short to cool down the wine.
- The door is not closed properly.
- The temperature is set too high. Adjust to a lower temperature setting if necessary.
- The ambient temperature is too high.
c. Wine temperature is too cold
- The wine cooler temperature is set too low. Adjust to a higher temperature setting if necessary.
- The ambient temperature is too low.
d. Wine cooler is runs too frequently
- This may be normal to maintain constant temperature during high temperature and humid days.
- Doors may have been opened frequently or for an extended period of time.
- Check gasket of the door for proper seal. (re-adjust the door position if necessary. For details, please
refer to the “door replacement” diagram).
- Check to see if doors are completely closed.
e. Moisture build up on interior or exterior of the wine cooler:
- This is normal during high humidity period.
- Prolonged or frequent door openings.
- Check door gaskets for proper seal. (re-adjust the door position if necessary. For details, please refer
to the “door replacement” diagram).
f. Wine cooler door does not shut properly
- Level the wine cooler.
- Check for the blockages. For example, wine bottles, shelves ..etc..

Other manuals for Haier HVW18

Related product manuals