SERVICE MANUL
HW50-1010W/HW50-1010S
Front Load Washing Machine
３
8-1. Remove packing materials _____________________________________________ １６
8-2. Dismantle packing bolts _______________________________________________ １６
8-3. Adjusting the washing machine _________________________________________ １７
8-4. Joining the Inlet Hose to the Washing Machine _____________________________ １７
8-5. Drainage Hose ______________________________________________________ １７
8-6. Connecting to the Power Supply ________________________________________ １９
Chapter 9 Wiring circuit and Self check ______________________________________ ２０
9-1. Wiring circuit ________________________________________________________ ２０
9-2. Self check __________________________________________________________ ２１
Chapter 10 Error Display and troubleshooting _________________________________ ２２
10-1. Error Display _______________________________________________________ ２２
10-2. Examination & Troubleshooting ________________________________________ ２６
10-2-1. Display nothing__________________________________________________ ２６
10-2-2. No water inletting ________________________________________________ ２７
10-2-3. No draining _____________________________________________________ ２８
10-2-4. Abnormal noise and vibration_______________________________________ ２８
10-2-5. Water leaking ___________________________________________________ ２９
Chapter 11 Maintenance ___________________________________________________ ３０
To Next Page
Loading...
Need help?
General
