Haier HWE10XCN User Manual (English)

Questions and Answers:

M
Matthew NelsonAug 15, 2025
Why my Haier Air Conditioner won't turn on?
- E
  Ethan GoodwinAug 15, 2025
  Your Haier Air Conditioner might not be starting due to several reasons: it may not be plugged into a grounded outlet, so ensure it is properly plugged in. The power supply cord may have tripped, in which case you should press the RESET button on the cord. The unit might be turned off, so use the remote control or the control panel to turn it on. Lastly, a household fuse or circuit breaker may have blown, requiring you to replace the fuse or reset the circuit breaker.
C
Carolyn SimonAug 18, 2025
Why is my Haier HWE10XCN not cooling the room enough?
- M
  Mark RogersAug 18, 2025
  If your Haier Air Conditioner isn't cooling effectively, it might be because the room is too hot; allow time for it to cool down after turning on the unit. Also, the temperature control may not be set correctly, so adjust it on the control panel or remote. Finally, check for any restrictions to airflow by ensuring the air discharge area is not blocked.
A
Andrea ReedAug 21, 2025
What to do if my Haier HWE10XCN keeps turning on and off?
- C
  Chad BrownAug 22, 2025
  If your Haier Air Conditioner cycles on and off frequently, consider these potential causes: * The air filter might be dirty or restricted, so try cleaning it. * The airflow could be blocked, ensure that the air discharge area is not obstructed. * The outside air temperature may be too low (below 61°F), avoid operating the unit under such conditions. * If the outside temperature is very hot, increase the FAN speed to the highest setting.
N
Nathan HerreraAug 25, 2025
How to fix a Haier Air Conditioner remote that is not working?
- T
  tiffany42Aug 26, 2025
  If your Haier Air Conditioner remote isn't working, the batteries might be dead, so replace them. Also, ensure the batteries are inserted in the correct position.
A
Amy BarryAug 28, 2025
Why is my Haier Air Conditioner making the room too cold?
- M
  Marc TrujilloAug 28, 2025
  If your Haier Air Conditioner is making the room too cold, it is likely that the temperature is set too low. Try raising the set temperature to a more comfortable level.
Y
yjuarezAug 31, 2025
Why is my Haier HWE10XCN dripping water outside?
- T
  Tony FloresAug 31, 2025
  If your Haier Air Conditioner is dripping water outside, it's likely due to hot, humid weather. This is normal during days with high humidity.
V
Victoria MorrisSep 4, 2025
What to do if my Haier Air Conditioner is freezing up?
- H
  hallpatrickSep 4, 2025
  If your Haier Air Conditioner is freezing up with ice forming on the coil, it's likely due to the outside temperature being too low (below 61°F). To defrost the coil, set the unit to FAN ONLY mode and increase the temperature setting.
N
Nicole ObrienSep 7, 2025
What to do if my Haier HWE10XCN drips water into the house?
- A
  Anthony WilliamsSep 7, 2025
  If your Haier Air Conditioner drips water into your house, the unit might not be properly leveled. You should tilt the unit slightly from the front to the back. Refer to Installation section. DO NOT drill a hole in the cabinet base.
J
Julie MartinSep 12, 2025
Why is water collecting in the base of my Haier HWE10XCN Air Conditioner?
- L
  Lisa KellySep 12, 2025
  If water collects in the cabinet base of your Haier Air Conditioner, it's likely due to humidity draining into the base. This is normal during days with high humidity. DO NOT drill a hole in the cabinet base.

Haier HWE10XCN Specifications

General

Brand	Haier
Model	HWE10XCN
Category	Air Conditioner
Language	English

Summary

Important Safety Precautions

General Safety Precautions

Warnings for personal injury, fire, electric shock, and unsafe conditions. Follow all instructions.

Operational Safety & Warnings

Operational Safety Guidelines

Ensures safe operation, maintenance, and correct installation of the air conditioner.

Tools and Parts

Tools Needed for Installation

Lists all necessary tools for installing the air conditioner, such as screwdrivers and levels.

Parts Supplied with Unit

Details all components included in the parts package for correct installation.

Location Requirements

Location Criteria for Installation

Specifies requirements for electrical outlets and unobstructed airflow for proper operation.

Window Installation Measurements

Provides specific width and height measurements for window openings for different models.

Electrical Requirements

Electrical Safety and Grounding

Highlights crucial safety rules regarding grounding, plugs, and avoiding unauthorized adapters.

Power Supply Cord Testing

Explains the function of the LCDI cord and how to test its safety features.

Unpacking the Air Conditioner

Packaging Material Handling

Instructions for safely removing packaging and storing it for future use.

Preparing the Air Conditioner

Installing the Top Channel

Steps to attach the top channel to the air conditioner unit using self-tapping screws.

Install Side Curtains

Side Curtain Installation Guide

Steps to attach and secure the side curtains and frames to the air conditioner unit.

Preparing the Window

Window Opening Measurements

Procedure for measuring and marking the window opening for correct unit placement.

Securing Unit to Window Sill

Steps for attaching side brackets to the window sill to secure the air conditioner.

Completing the Installation

Attaching Side Curtains to Window

Detailed instructions for securing the side curtains and frames to the window frame.

Final Installation Checks

Includes adding foam seal, window lock bracket, and plugging into power.

Starting the Air Conditioner

Initial Unit Power-On

Steps to power on the unit for the first time and initial display settings.

Important Operating Notes

Key points to remember for operation, such as compressor delay and temperature limits.

Operating Modes Explained

Mode Selection Guide

Details on Fan, Energy Save, Cool, and Dehum modes for optimal usage.

Fan Speed and Timer Settings

Fan Speed Selection

How to select fan speed for different operating modes.

Timer Programming Guide

How to program the timer for automatic on/off operation.

Advanced Operation Modes

Sleep Mode Functionality

Instructions for using Sleep mode and its temperature adjustments.

Temperature Adjustment Controls

How to adjust temperature settings using the TEMP/TIME buttons.

Filter Reset and Remote Use

Filter Reset Indicator Function

How the filter reset light works and how to reset it after cleaning.

Using the Remote Control

Remote Control Features

Overview of remote functions, battery replacement, and Braille markings.

Remote Control Operation Guide

Instructions for using the remote to control power, mode, speed, and timer.

Changing the Air Direction

Airflow Direction Control

Explains how to adjust louvers for 2-way or 4-way airflow.

Cleaning the Air Filter

Air Filter Maintenance Procedure

Step-by-step guide for removing, cleaning, and reinstalling the air filter.

Cleaning the Front Panel

Front Panel Cleaning Instructions

Proper methods for cleaning the unit's front panel without causing damage.

Annual Maintenance

Annual Maintenance Recommendations

Advice on scheduling professional annual checkups for optimal performance.

Customer Service

Contacting Customer Support

Information on how to get assistance, warranty service, and contact Haier America.

Troubleshooting

Common Air Conditioner Problems

List of typical issues like non-operation, poor cooling, and their corresponding solutions.

Limited Warranty

Warranty Terms and Coverage

Details the one-year and five-year limited warranties, what is covered, and exclusions.

Getting Warranty Service

Procedure for contacting Haier America to obtain service under warranty.

Related product manuals