EasyManua.ls Logo

Haier HWM50-10 - User Manual

Haier HWM50-10
18 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Full Automatic Washing Machine
User's manual
This manual is for
Please read this manual
carefully before using.
Retain it for future reference.
HWM50-10
User's manual
0030805169G
HWM50-10B

Table of Contents

Questions and Answers

  • D
    Donna WintersAug 12, 2025
    What to do if my Haier HWM50-10 Washer won't wash or spin?
    • T
      Tara ThomasAug 12, 2025
      If your Haier Washer isn't washing or spinning, several factors could be at play. First, check for a power failure or a loose power plug and ensure the power is on and the plug is tightly inserted. Also, make sure the water level has reached the set level. Another possible cause is that the top lid isn't closed or the laundries aren't arranged properly. Ensure the lid is closed and the laundries are put orderly.
  • R
    rogersmithAug 15, 2025
    What to do if my Haier Washer is not filling with water and shows error E4?
    • Y
      yvonnegonzalesAug 15, 2025
      If your Haier Washer is not filling with water within 15 minutes and the display shows "E4", accompanied by a buzzing sound, it could be due to several reasons. First, ensure that the water tap is fully open. If it is, try pressing the "Start/Pause" button. A blocked water inlet valve may also be the cause, so try cleaning it and then press "Start/Pause" again. Finally, low water pressure could be the issue; wait until the water pressure returns to normal before using the machine.
  • L
    longryanAug 19, 2025
    Why is my Haier HWM50-10 buzzing and showing error code E1 with slow drain?
    • W
      wrivasAug 19, 2025
      If your Haier Washer is buzzing and the nixie tube indicates "E1" with a slow or non-existent drain, the drain hose might be down or blocked. Make sure the drain hose is properly positioned. Also, check the drain hose for any foreign material that might be causing a blockage and remove it. After checking the hose, open and close the top lid once.
  • J
    Jenna BernardAug 23, 2025
    What to do if my Haier HWM50-10 Washer stops mid-cycle and shows error E2?
    • K
      Kelly NolanAug 23, 2025
      If your Haier Washer pauses during operation, the nixie tube indicates "E2", and you hear a buzzing sound, it's likely that the top cover has been left open. Ensure the top lid is securely closed.
  • N
    Nathan DodsonAug 27, 2025
    Why does my Haier HWM50-10 make abnormal sounds?
    • F
      Frederick ZimmermanAug 27, 2025
      If there's an abnormal sound coming from your Haier Washer, it might be because the machine is not level or the laundries are unevenly distributed during spinning. To fix this, ensure the machine is properly leveled. If the sound persists, re-order the laundries inside the machine.
  • J
    jason56Aug 30, 2025
    How to fix Haier HWM50-10 error E3 and no spin?
    • V
      Vanessa RiosAug 31, 2025
      If your Haier Washer's safety switch activates, it doesn't spin, and the nixie tube displays "E3" with a buzzing sound (after two self-correction attempts), it could be due to the laundries being placed unevenly or the machine itself being tilted. Try re-ordering the laundries and ensure the machine is level. Also, close the top lid and then open and close it once.
  • M
    mary68Sep 3, 2025
    Why is my Haier HWM50-10 Washer buzzing and showing error code "E0"?
    • L
      Luis MosleySep 3, 2025
      If your Haier Washer is buzzing and the Nixie tube indicates "E0" when you start a reservation, it means the top lid is not closed properly. Make sure to close the top lid.
  • M
    Madison KingSep 7, 2025
    How to resolve poor waterfall flow in my Haier HWM50-10 Washer?
    • D
      Dale MillerSep 7, 2025
      If you're experiencing poor or no waterfall flow in your Haier Washer, the nozzle is likely blocked by foreign bodies. You should remove these foreign bodies to restore proper flow.

Summary

Safety Precautions - Electrical and Environmental

Safety Precautions - Usage Restrictions

Installation and Adjustment

Installing Key Components

Guide for installing the lint filter and bottom plate.

Adjusting Installation Position

Steps to level the machine on uneven surfaces using adjustable feet.

Water Inlet Hose Connection to Tap

Water Inlet Hose Connection to Machine

Preparation Before Washing

Pre-Wash Setup Procedure

Laundry Preparation Tips

Operation Buttons Overview

Operating Procedures

Troubleshooting Common Issues

Diagnostic Guide and Solutions

Lists phenomena, potential causes, and corrective actions for breakdowns.

Explanation of Common Occurrences

Haier HWM50-10 Specifications

General IconGeneral
TypeTop Load
Capacity5 kg
Spin Speed700 RPM
ColorWhite
Energy Rating3 Star
Wash ProgramsDelicate, Quick
Washing ProgramsStandard, Delicate, Quick

Related product manuals