Dismantle
Install
Maintenance
Remove the power plug before carrying out any cleaning or maintenance.
Clean the lint filter(s) and detergent box after each wash.
If the cabinet is dirty, wipe it with a damp cloth.
Do not wash directly with water.
Wipe with a neutral detergent (please check
directions on detergent bottle first).
Do not wipe machine with thinners, petrol,
alcohol or other harsh solvents.
The filter screen of the water inlet valve
may become to be blocked by foreign
materials and influence the water inlet.
Please clean it with brush every two
months.
Remove and clean the detergent
box, replace after cleaning.
1. After washing cycle has finshed, turn off the water faucet. (If needed, you can
remove the water inlet hose).
2. Do not store water in the washing machine for a long period without completing
a wash cycle. Drain the water completely after each wash.
3. Hang up the power cord and drain hose.
4. Wipe up any drops of water on the surface of the machine and inside the tub.
Leave the lid open for about 1 hour after each wash to evaporate any residual
water.
The lint filter must be used during washing.
It must be cleaned after each use
Lint filter:
1. Slide upwards to remove.
2. Gently push it down to install;
ensuring it is in place before
next wash.
14
To Next Page
Loading...
Need help?
General
