7
Heading 1
EN
Introduction to Primary Functions of the Appliance
1.
Temperature Adjustments
To set the temperature hold the button for about 3 seconds. Then the temperature
display of IN.T° flashes . Press the or button to increase or decrease the
temperature setting. Once the desired temperature is attained, press the button.
2.
Control Panel
The temperature range of display panel is 5～20°C（41～68°F）.
The default setting temperature is 12°C（54°F）.
You can set the temperature according to your wine storage requirements.
Interior Light
Compliment the look of your collection, a soft light has been built into the wine cellar.
Simply push the button and the light comes on, push again for off.
When door is open the light will go on. Upon closing the door, light will go off.
3.
“°F/°C” Conversion
Press and hold for 3 seconds, the displayed temperature in Fahrenheit degree
and °F character will convent to temperature in Celsius degree and “°C” character.
Press and hold for 3 seconds again, the temperature in Celsius degree
and “°C” character will convert to temperature in Fahrenheit degree and “°F” character.
Adjustment
(up
)
Light
SET
Power
Adjustment
(down
)
To Next Page
Loading...
Need help?
General
