Use
EN
Notice
Notice
,QƫXHQFHVRQWHPSHratXrHV
The temperature inside the appliancHLVLQƫXHQced by the following factors:
▶ Ambient temperature
▶ Frequency of door opening
▶ Amount of stored bottles
▶ The location of the appliance
The default setting is 12°C
When display stRSVƫDVKLQJLWJRHVEDFNto showing the current temperature
inside the wine cellar. It will taNe some time to reach the set temperature.
r&r)IXQFWLRQ
10. Power2Ʃ0HPRU\IXQFWLRQ
11. LoZWHPSHratXre cRPSHQVDWLRQIXQFWLRQ
'RRURSHQLQJDODUP
If the door is Nept open fRURYHUPLQEuzzer will be beeping to give an alarm
till the door is closed or any Ney on display panel can be operated and then the
buzzer will stop beeping.
The wine cellar has a low temperature compensation function to ensure the stability of
the temperature: When the ambient temperature is lower than the set temperature the
wine cellar automatically starts the low temperature compensation function heating the
application.When the temperature in the application reaches the set temperature the
Press the buttRQswitch between Fahrenheit and Celsius.
If a powHURXWDJHWKHcellar will automatically save the set temperature. After
power recoveryLWZLOOUXQEDVHGRQWKHtemperature set before the power outage .
20
+XPLGLW\GLVSOD\
Hold the “
The humidity of cabinet is tested in accordance with the EuropeDQVWDQGDUG(1
the test resultat of humidity of cabinet is 50%-80% which is in line with EN 62552 and
(EU ) 2010/1060 requirements.
ŞEXWWRQIRUVHFRQGVWKHGLVSOD\SDQHOZLOODSSHDUWKHSHUFHQWage of
humidity. Press the “+” or “-” buttons to turn RƩ humidity display.