Haier HYC-1378 - Component Names Control Panel

17
12
Glass door
Door lock
Handle
Casters
Light switch
Shelf
Control panel
Door alarm switch
Component Names
HYC-1378
Component Names Control Panel
Note
During setting process of 1P-5P, the parameters that need to be adjusted may be adjusted
selectively by “ Minus ” button or “ Plus ” button. For example, if the inside temperature display
area currently shows 1P(Year) and there is need to adjust Year(1P) or Month(2P) but date(3P),
press “ Plus ” button to select Date(3P) and press “ Set ” button ,then the inside temperature
display area flashes Date, press “ Minus ” button or “ Plus ” button to adjust the current date, and
the press “ Set ” button to save and confirm. Thereafter, the inside temperature display area
shows Hour(4P). if necessary, press “ Set ” button to adjust, if not, press “ Plus ” button to
Minute(5P) for minute adjustment, after completing settings, press “ Set ” for 5s to save and exit,
then the inside temperature display area nirmally shows the inside temperature. During setting
process of 1P-5P, after completing all parameter settings, and there are no other parameters
needing to be adjusted, press “ Set ” button for 5s or there is no any operation for 10s to
automatically save and exit.
USB Connector