Why my Haier Fryer does not work?
If your Haier Fryer isn't working, it could be due to a couple of reasons. First, ensure the appliance is properly plugged into the wall socket. Second, make sure the frying bucket and basket are securely pushed into the body of the appliance.
What to do if food is not completely cooked in Haier Fryer?
If your food isn't fully cooked in the Haier Fryer, the set temperature may be too low, or the cooking time too short. Try increasing both the cooking temperature and the cooking time. Also, ensure that you are not overloading the basket with too many ingredients. Decrease the amount of ingredients in the basket for more complete frying.
Why does white smoke come out of my Haier Fryer?
White smoke coming from your Haier Fryer can be due to cooking fatty ingredients. Carefully pour off any excess oil or fat from the pan before continuing to cook. It may also be caused by greasy residues in the basket from previous use. Always clean the bucket and the basket thoroughly after each use.
What does error code E-3 mean on Haier Fryer?
The error code “E-3” on your Haier Fryer indicates that the overheat protection has been triggered. Please let the appliance cool down completely before turning it on again.
What to do if display shows error code “E-1” on Haier Fryer?
If your Haier Fryer displays the error code “E-1”, it means there is an open circuit in the temperature sensor. Unplug it from the power source and contact the customer support.
What does error code E-2 mean on Haier Fryer?
If the display of your Haier Fryer shows error code “E-2”, it indicates a short circuit in the temperature sensor. Unplug it from the power source and contact the customer support.
What to do if my Haier Blender gets hot during operation?
If the main body of your Haier Blender gets hot during operation, allow the unit to cool fully before using it again.
How to fix a Haier Blender that is slowing down?
If your Haier Blender starts to slow down or labor during processing: * Check the bottom of the motor head to ensure it is clean and that no food is blocking the connection when placing it on containers, and that there is not too much food in the container. * If the unit has overheated, unplug it and wait approximately 10 minutes before using it again.
Why is white smoke coming out of my Haier Fryer?
If white smoke is coming out of your Haier Fryer, it could be due to cooking fatty ingredients. Carefully pour off any excess oil or fat from the pan and then continue cooking. Alternatively, the bucket might still contain greasy residues from previous use. Always clean the bucket thoroughly after every use.
How to fix a Haier Fryer that does not work?
If your Haier Fryer does not work, first check if the appliance is properly plugged into the wall socket. Also, make sure the frying bucket is securely pushed into the appliance’s body.
Essential safety guidelines and warnings for operating the air fryer safely and preventing hazards.
Identifies the main parts of the air fryer and its control panel functions.
Steps to prepare the air fryer before its initial operation and notes on initial use.
Covers plugging in, inserting ingredients, and using the ON/OFF and Dial controls.
Explains how to set temperature and time, pause, resume, and use the internal light.
Details what happens at the end of cooking and how to handle ingredients needing shaking.
Guides on how to clean the basket, bucket, heating element, and exterior safely.
Addresses common problems, their causes, and solutions for the air fryer.
Provides essential technical specifications like electrical connection and power.
Information on obtaining genuine spare parts and consumables for the appliance.
Details about product quality assessment and the appliance's guarantee conditions.
General| Type | Food Processor |
|---|---|
| Series | I-Master 5 Series |
| Power | 1000W |
| Voltage | 220-240V |
| Frequency | 50/60Hz |
To Next Page
