Base Stand Assembly Instruction
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TV on the stand.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
INSTALLATION NOTES
Introduction
EN-7
2. Attach the stand base plate to the stand pole
by firmly tightening the supplied screw.
1.Place the TV with the display side down on a flat
surface.Use a cloth to protect the display.Position
the stand base pillar onto the bottom of the TV.
(22",24")
(28")
(32")
To Next Page
Loading...
Need help?
General
