1- Light Canopy 2- Shelves 3- Handle
4- Down lock knob 5- Door Support 6- Magnetic switch of door
7- Front shield 8- Casters 9- Up hinge
10-Light switch 11- Glass door 12- Side lamp in cabinet
13- Down hinge 14- EMS control 15- Feet
16- Cabinet 17- Bumper bar 18- Filter screen
EMS-55 Malfunction & Maintenance
Malfunction hints
The following hints mean that you should inform the service people for
adjustment
Hi-temperature alarming light of the condenser sh red light on the
panel) together with the alarming sound malfunction with condensing system.
After eliminating the malfun ton.
If there n the panel together with the alarming sound:
Light is not on under operation mode.
There i nel malfunction with sensor controller.
Attention
EMS controller is fitted with sensing probe. Be sure that the orifice at left top side
is unclogged and unblocked.
Repair
The term of service of the EMS is the same as the machine you have purchased. If
EMS does not work properly, please inform our maintenance and repair men for
replacement. Do not disassemble it by yourself.
ows “on” (HT
ction, press the “UP” but
is “RSF” shown o
malfunction with refrigerating system. After eliminating the malfunction, press the
“DOWN” button.
s “PF”shown on the pa
14
To Next Page
Loading...
