15
Operation
(1) If the current temperature is displayed in Celsius, adjust
temperature in each mode to 30°C(when energy saving
function is set currently, the parameter in heating mode will be
the highest limit value). Then press
key for 15s to switch
to Fahrenheit, the interface will display 86°F (when energy
saving function is set, its highest limit value of Fahrenheit will
be displayed).
(2) If the current temperature is displayed in Fahrenheit, setting
temperature should be adjusted to 60°F in each mode(when
energy saving function is set currently, the parameter in
cooling/dry mode will be the lowest limit value). Then press
key for 15s to switch to Celsius, the interface will display 16°C
(when energy saving function is set, its lowest limit value of
Celsius will be displayed).
Switch between Fahrenheit and Celsius
(2) When the HRV function is turned on, if you want to turn it
o, please enter function circulation and switch to
icon,
then press MENU key , and the function will be turned o.
To Next Page
Loading...
