18
Operation
(4) In the state of 10°C heating function, if you change modes
or adjust temperature setpoint, you will exit the 10°C heating
function.
(1) For 4-way/Round-way Cassette, the
icon and the
icon will be displayed in the main interface.
(2) Press MENU key to select the air deector to be set (By
pressing MENU key, you can switch between the air deector
1,2,3,4 as well as the simultaneous control.), and which air
deector ashing indicates that it is selected. When selecting
a certain air deector, you can use
or key to adjust its
swing angle.
(3) After adjustment, you can press MODE / FAN / TIME key or
wait 10 seconds to exit the settings.
Four-sided air deector (only valid for part of models)
To Next Page
Loading...
