Haier YR-E17A - Page 31

30
(1) Setting method: Keep pressing the MENU key +
key for
5 seconds to enter the advanced settings, the unit number is
displayed in the lower right corner, and the decimal display
area of the temperature ashes to display the function
classication. Switch to H by clicking the FAN key. The function
code is displayed in the integer area of the temperature zone.
At this time, press
or keys to switch function code to 05.
Then press the MENU key to conrm, 05 in the temperature
integer area is displayed statically, and the specic information
in the clock display area is ashing. Pressing
or keys to
switch the parameters, and pressing the MENU key to conrm.
(2) In the clock display area, 1 means the local VIP is turned
on, and 0 means the local VIP is turned o󰀨;
(3) If VIP is not set in the external machine system, any line
controller of internal machine can be set with VIP function; if
the external machine system has set VIP function, only the
VIP machine can be set up VIP on or o󰀨.
(4) After setting VIP function, if the internal machine is sated
VIP function, the main interface will display the characters
"VIP"; if it is a non-VIP internal machine, and when the mode
of internal machine is di󰀨erent from the VIP internal machine,
the controller will display the "Mode conict" icon.
VIP ( Only valid for part of models)
Operation