Haier YR-E20 - Filter Cleaning and Fresh

18
Filter Cleaning
When lter cleaning icon displays, press function key ,then
press up/down key to activate
, then press function key to
remove lter cleaning icon.
The swing function exit:
Pressing Fan key or Mode key can both exit swing function;
After adjusting angle of swing, press function key to conrm
the angle and exit the swing function; In the adjustment
process, if there is no key pressed for 10s, swing function
will be exited, and swing angle will execute the nal
adjusted angle. In the adjustment process, pressing the
ON/OFF key to power o󰀨 the wired controller directly, and
swing angle is the nal adjusted swing angle.
Fresh
1. Choose fresh by function and up/down keys, when the
icon ashes, press function key to conrm, then the icon
displays statically. Do same operation again to cancel fresh
function.
2. After you set fresh, it is switched o󰀨 together with o󰀨
commend from wired controller. fresh will be kept once the
unit is switched on . You can set the fresh under unit o󰀨
state and keep it when the unit is switched on again. It will
not disappear when changing mode.
3. Fresh is in function cycle only when SW4 is OFF.