21
Turbo/Quiet
1. Choose the by function and up/down keys, when the
icon ashes, press function again to set or cancel the quiet
function. The turbo function operation is same to quiet
function.
2. After setting turbo/quiet, fan speed changes to auto. Under
this state, you will quit turbo/quiet function if you press fan
speed key and the fan speed will return to the state before
entering into turbo/quiet. You cannot set turbo and quiet at
the same time, the last operation will instead of the prior
one. You cannot use turbo function during sleeping time.
3. You can nd turbo/quiet in function cycle only under cooling/
heating mode and SW4 is OFF. They will be cancelled after
any mode change operation and on/o operation.
ECO
1. Press function key to enter function setting, then press up/
down key to choose energy saving, press function key
again to conrm the operation and display energy saving
icon
. If energy saving function has been set, the above
operation will cancel the energy saving function.
2. This icon will not display under o state. The ECO setting
is memorized always. You can set ECO function under any
mode. But it is available under cooling/heating/dry modes
only.
To Next Page
Loading...
