Haier YR-E20 - Health Airflow

27
4. Health airow
This function is set only by remote controller, after setting, it
will memorized in mode shift and will not memorized when
powering on/o󰀨 and powering down. After setting, the four
swing position will display in circulation (as blow graphs),
meaning the swing air is in rotation and the up/down angle
displays auto swing in the meanwhile. In health airow,
press function key, it will display the swing blade and up/
down angle before entering the health airow. Press up/
down key in 5s to adjust swing angle and quit health airow,
if there is no pressing of up/down key for 5s, resume health
airow.
display 1s display 1s display 1s display 1s display 1s
(4) The initial entering default position after powering on
is as above mentioned, and the swing angle will in
circulation by up/down key from default position, for
example, if current position is in position 3, press up key
to position 2, press down key to position 4. If it is not
initial entering, swing angle will in circulation from the
last setting angle.