Hailo H-50 - General Information and Symbol Explanation

2
Manufacturer:
HAILO-Werk
Daimlerstr. 2,
35708 Haiger, Germany
+49 (0) 2773 82-0
+49 (0) 2773 82-1561
E-mail: info@ hailo-professional.de
www.hailo-professional.de
Certifying and supervising body:
DEKRA Testing and Certification GmbH
Dinnendahlstr. 9,
44809 Bochum, Germany
Identification no. 0158
1. General information, explanation of symbols
This information booklet describes how to use,
maintain and test the SPL-50-PRO fall arrester.
For your safety, please read this information
brochure carefully before use.
If the fall arrester is resold to another country,
it is necessary for the safety of the user that
the retailer provides the user with the informa-
tion in this booklet in the respective national
language.
The SPL-50-PRO fall arrester may only be used
on the H-50 fall arrest system.
Use, maintenance and inspection must be car-
ried out exclusively in accordance with the
specifications in this booklet.
The warranty will become null and void in the
event of damage caused by non-observance of
this booklet. No liability shall be assumed for
any consequential damage arising from this.
For ease of understanding, this brochure has
replaced the term used in DIN EN 353-1:2018,
“Guided type fall arrester including rigid anchor line”,
with “fall arrest system”.
EU Declaration of Conformity and
EU-Type Test Certificate: