Hakki Pilke Eagle - Connecting to Tractor

7 (29)
Hakki Pilke Eagle Translation Version 5
Adjusting the Splitting Table
Connecting the Machine to a Tractor
Always make sure you are on your own when connecting the machine. Make sure that the
tractor cab is free of people or animals (e.g. dog) which might accidentally nudge the controls
during connection. Before connection, check all connection components of the tractor and
machine. Any faulty parts must be repaired or replaced with new ones. Connecting the
machine to faulty devices or parts is strictly forbidden. To avoid human error, always carry
out the connection carefully and systematically without interruption, making sure nothing is
missed. Secure the connection pins with the appropriate cotters. After finishing the
connection, check that the procedure has been completed successfully. When connecting the
PTO shaft, follow the instructions for safe connection provided by the shaft manufacturer.
Connecting an unshielded shaft to the machine is strictly forbidden!
The splitting table
distance can be
adjusted using the
adjustment nut at the
bottom of the table.
Never set the splitting table
distance so that the tip of the
splitting cone protrudes from the
table cover! Set it as shown in
the figure!