Hakki Pilke OH 27 User Manual

16 (39)
Hakki Pilke 27 Original Version 5-2014
If an electrically driven machine is driven by a tractor, all instructions in this manual
on the safe operation of a tractor-driven machine must be followed.
Operation and Control of a Hydraulic Splitting System
The position of the control lever is shown in section The Machine from the Front.
When the control lever
is in the IN
OPERATION position,
the splitting system is in
operation and the
splitting chute cover
cannot be opened.
The mechanism at the
joint prevents it.
When the splitting lever
is in the STOP position,
the splitting system is
not in operation. The
opening mechanism is
unlocked and it is
possible to open the
cover.
Do not operate the
machine if the locking
mechanism is out of
order.
When the control lever
is pushed to the
REVERSE position, the
splitting cylinder
retracts to its initial
position. This function
is used if the cylinder is
not able to split the
wood and the cylinder
must be reversed.

Hakki Pilke OH 27 Specifications

General

Brand	Hakki Pilke
Model	OH 27
Category	Log Splitter
Language	English