What to do if my HAKO Cleanserv VL1-15 Vacuum Cleaner doesn't switch on or turns off?
If your HAKO Vacuum Cleaner doesn't switch on or turns off during use, it could be due to several reasons: * **No electricity:** Check the main fuse, plug, and socket. * **Overload protection activated:** Inspect the machine and clean it if necessary. * **Other reasons:** For other potential issues, it is best to call an authorized service center.
Why is the suction reduced in my HAKO Cleanserv VL1-15 Vacuum Cleaner?
Reduced suction in your HAKO Vacuum Cleaner could be due to a dirty or leaking filter, hose connection, hose, or suction tube. Inspect these components and clean them as needed to restore proper suction.
What to do if my HAKO Cleanserv VL1-15 loses suction while vacuuming fluids?
If your HAKO Vacuum Cleaner experiences a sudden loss of suction during fluid intake, it's likely because the tank is full. Switch off the device and empty the tank to resume normal operation.
General| Container capacity, gross | 15 l |
|---|---|
| Sound level | 68 dB(A) |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Power rating, max. | 1000 W |
| Weight | 5.4 kg |
| Type | Dry vacuum cleaner |
| Motor power | 1000 W |
| Hose length | 2.5 m |
| Hose diameter | 32 mm |
| Noise level | 68 dB(A) |
| Airflow | 3600 m³/h |
To Next Page