HALE PET DOOR User Manual

HALE PET DOOR™
INSTALLATION INSTRUCTIONS
SCREEN MODEL – UNIVERSAL MODEL
Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will
guide you through the steps and precautions needed for a screen installation. Illustrations and pictures have
been added to help you understand various instructions. In order to reach an experienced installer for free
consultation, please call 1-800-646-4773. Hale Pet Doors are designed for ease of installation which makes
them ideal for any type of screen. Any person with a working knowledge of power or hand tools and basic home
construction can install the Hale Pet Door™. It is important to note however, that the product warranty may be
affected if returns have been modified in any way other than specified by these instructions. We cannot give
credit for a door returned to us damaged.
A SAFETY REMINDER!
Always wear eye protection and gloves when appropriate.
Before installing:
The Hale Pet Door Universal Screen Model is designed to fit into one of the lower corners of a screen door
frame or screen window frame that over 1/2" thick. In screen frames that are 1/2" thick or less the standard
screen model should be used although the universal model will work in those situations as well. The doors are
very similar but the installation process differs between the two models. The universal screen pet door is
completely reversible and will fit into either corner of the screen frame.
Note: The Hale Pet Door™ screen model is not designed to work on security doors. A “door” model is a much
better choice for a security screen application.
Step 1: Before installation, be sure that you have the proper size pet door for the pet. If in doubt larger is better.
It may be harmful for the pet to use a pet door that is too small. A good general rule is to install the pet door so
that the distance from the floor to the top of the passage opening is above the shoulder of the largest pet. If
the customer has more than one pet, make sure the tallest pet has shoulder clearance and the shortest pet will
not have to jump through the opening.
Step 2: Take a brief look at the large diagrams of the screen model at the end of the instructions and become
familiar with various components of the screen model. This will not only help in understanding the terms used
in these instructions, but it can be very useful should you need to
call for technical support.
Step 3: Check the package to make sure that it contains all the
necessary parts.
Complete Kit includes:
Installation Booklet (includes warranty, policies, training, etc)
Hale Pet Door™ screen model Screen spline 3/16”
Phillips head screws ¼” 7/64" drill bit
Metal screen retainer clips
Screen Stabilizer Bar Kit included with pet door sizes TL and larger (optional purchase with smaller pet doors)
Tools and supplies you may need:
Drill Razor blade Flat headed screwdriver or putty knife
Phillips headed screwdriver Screen spline roller (handy but not necessary)
Needle-nosed pliers (optional) Silicone caulk
Step 4: Determine which corner of the screen door is to be used for installing the pet door.

HALE PET DOOR Specifications

General

Flap Material	Vinyl
Sizes Available	Small, Medium, Large
Security Cover	Yes
Installation Type	Door, Wall
Suitable for	Cats
Weatherproof	Yes

Summary

Hale Pet Door Installation Overview

Safety Precautions

Always wear eye protection and gloves when appropriate during installation.

Pre-Installation Checklist

Verify pet door size, review diagrams, confirm all parts are present, and gather necessary tools.

Required Tools and Supplies

Lists essential tools like drills, screwdrivers, razor blades, and optional items for installation.

Screen Model Installation Steps

Screen Removal and Preparation

Remove the screen door from its track and lay it flat, then carefully remove the screen spline from the installation corner.

Positioning and Securing the Pet Door

Place the pet door snugly against the frame, attach metal retainer clips, and drill pilot holes for screws.

Installing Screws and Silicone Sealant

Insert screws to secure the pet door and apply silicone sealant in the spline track for waterproofing.

Re-attaching Screen Fabric

Lay screen material back, pull taut, and insert screen spline to secure it around the pet door frame.

Final Trimming and Finishing

Carefully trim excess screen fabric and spline, clean any excess sealant, and ensure the screen is taut.

Final Adjustments and Re-installation

Cut away excess spline, re-install the screen door, and adjust magnets for proper closure.

Technical Specifications

Component Details

Details flap material, spline frame composition, magnet type, strike dimensions, and weather-stripping specifications.

Optional Stabilizer Bar Kit Installation

Stabilizer Bar Kit Overview

Explains the purpose of the stabilizer bar for added rigidity, especially for large or active pets.

Installing the Spreader Bar

Measure, cut, and attach the spreader bar to the screen door frame using aluminum clips.

Attaching Retainers and Securing the Bar

Slide metal retainers onto the pet door frame and push the spreader bar down flush, securing it with screws.

Final Checks and Cleanup

Ensure the screen mesh is taut, spline is secure, trim excess fabric if needed, and clean the installation area.