4
MAINTENANCE OF SIDE CABINET
MAINTENANCE
REMOVING AND INSTALLING DRAWERS
Pull the drawer completely out, press down left tab
and lift up right tab, pull drawer off slides.
To reinstall the drawer: Fully extend the runners,
carefully slot the drawer back into the runner and
press into the cabinet. Some resistance is normal
however if a lot is felt, remove and realign.
Drawer slides should be lubricated periodically.
(See Halford’s lubricant range).
Hardware (nuts, bolts, screws) should be
tightened periodically to maintain trouble
free operation.
(2) LOCKING
Close all drawers and doors before locking, if a drawer is not locked, unlock unit
and push the drawer fully closed before re-locking.
To Previous Page
Loading...