Need help?Do you have a question about the Hallberg-Rassy HR 43 and is the answer not in the manual?
General| Brand | Hallberg-Rassy |
|---|---|
| Model | HR 43 |
| Category | Boat |
| Language | English |
Explanation of Danger, Warning, and Note signs.
Information on emergency exits and man overboard procedures.
Guidance on engine break-in, running, and sea water intake.
Maintenance and function of propeller shaft seals.
Details on propeller checks, anodes, and gearbox operation.
Procedure for folding a sailing propeller into sailing position.
Guidelines for filling water and diesel tanks, including environmental protection.
Estimates for diesel consumption per hour for various models.
Diagram of the diesel system for specific models.
Diagram of the diesel system for HR 412.
Diagram of the diesel system for HR 48, 55, 64.
Includes preventer line warning and rig tuning advice.
Covers back stay tensioner, furling mainsail, and swan neck fittings.
Information on sail care, dimensions, and handling.
Guidelines for charging batteries and voltage limits.
Instructions for checking acid levels and battery safety.
Factors affecting battery self-discharge rates.
Tips for monitoring and managing onboard electricity usage.
Warning about battery drain from inverters and sleep mode devices.
Safety measures for the 230V system, GFCI, and shore connections.
Recommendations for using generator and engine offshore, especially during heeling.
Details on water system, heater, filters, and equalizer.
Information on twin water tanks and equalizer settings.
Diagram of fresh water systems for HR 372 and 412.
Guidance on refrigerator temperature settings and usage.
Common issues and operational advice for boat heaters.
Instructions for operating toilets and ensuring watertightness.
Procedures for emptying the holding tank and local regulations.
Information on manual and electric bilge pumps and their limitations.
Table detailing bilge pump types, capacities, and positions for different models.
Operating the anchor windlass safely and securing the anchor.
Advice on maintaining galvanized and stainless steel anchor chains.
Information on operating and maintaining the bow thruster.
Safety precautions and leak testing for the LPG system.
Checks for stove security, portlights, skylights, doors, and hull openings.
Essential safety measures to prevent gas leaks and ensure ventilation.
Guidance on compass compensation and winch maintenance.
Adjusting steering wires and lubricating rudder bearings.
Ensuring the security of the rudder shaft fitting on HR 310.
How to connect and use the emergency tiller.
Guidance on autopilot settings and calibrating electronic instruments.
Proper stowage of fenders to avoid damage and ensure safety.
Procedures for cleaning and treating teak decks against mildew.
Advice on antifouling paint application and underwater area treatment.
Instructions for cleaning carpets and maintaining galley worktops.
Procedures for cleaning tanks and understanding electrolysis.
Using screws to adjust hinges and identifying screwdriver types.
Guidelines for safely lifting and supporting the boat ashore.
Information on radar pole lift capacity and extra transom steps.
Measures to prevent damage from freezing to boat systems.
Maintenance of skinfittings and safety for hose clamps.
Diagrams of through hull fittings for HR 310, 342, 372, 412.
Diagrams of through hull fittings for HR 40, 43, 48, 55, 64.
Steps for preparing the boat for extended periods of inactivity.
Guidance on maintaining the water tank during lay-up.
To Next Page