Halma Fortress amGardpro - User Manual

Description
For secure head retention in all applications the top M8 head xings must be used.
Fortress provides a single action escape release function from inside a guarded
area through the use of a head and handle application. This unit may be installed
in left or right orientation to hinged doors. The tongue incorporates a self-aligning
feature to cater for misalignment on guards. Simply turning the red handle will open
a locked guard from the inside and open the safety contacts. Releasing versions of
other modules are the type that MUST be used in conjunction with this module.
• Intuitive single action escape release handle.
• Escape release activation releases tongue and opens safety contacts.
• Handle includes Lock-Out for 4 padlocks of 8mm diameter.
• 10kN retention force.
• Stainless steel tongue is ideal for fast and frequent access.
• 2 mounting position at 180° increments allowing on site handing change
possible.
• Misalignment tolerance of +/- 10mm with +/- 4° angular misalignment.
• Security tool reset after escape release actuation or auto reset function available.
• Head can be tted with lock-out device for additional lockout capability.
NOTICE!
If, as a result of risk assessment, it cannot be discounted that persons can be enclosed within a danger zone, the guard locks
with additional removable keys (safety keys) must be used or comparable measures must be taken - GS ET 19.
Options & Ordering Information
Description Part No. Handling
proHead
Security Tool Reset Escape Release Head I6 Left / Right
Security Tool Reset Escape Release Head c/w Drop Down Lock-Out I7 Left / Right
Automatic Reset Escape Release Head A6 Left / Right
Automatic Reset Escape Release Head c/w Drop Down Lock-Out A7 Left / Right
proHandle
Escape Release Handle EI2 Left
Escape Release Handle EI4 Right
Escape Release Handle - Allowing Closing of Door From Inside EJ2 Left
Escape Release Handle - Allowing Closing of Door From Inside EJ4 Right
Important:
This product is designed for use according to the installation and operating instructions enclosed. It must be installed by
a competent and qualied personnel who have read and understood the whole of this document prior to commencing
installation. If the equipment is used in a manner not specied by the manufacturer the protection provided by the equipment
may be impaired. Any modication to or deviation from these instructions invalidates all warranties.
Fortress Interlocks Ltd accepts no liability whatsoever for any situation arising from misuse or mis-application of this product.
Note: The availability of spare Actuators and Keys makes it possible to easily bypass the safety devices and, for this reason,
the security of any spare Actuators and Keys must be e󰀨ectively monitored.
DO NOT LEAVE OVERRIDE/RESET KEY IN PLACE!
Always keep in a secure place, under management control, as it allows access to areas that may have a residual
hazard, and may result in incorrect operation of some devices.
Safety switches (such as a STOP or LOK) must be tted in conjunction with this unit to monitor when the Internal
Escape Release has been activated. When lock adaptors are also used it is not possible to change outside from a
STOP to a LOK (and vice versa) without other changes to the locks - seek advice from Fortress.
BEWARE OF INTENTIONAL MISUSE CAUSED BY OPERATORS WANTING TO BYPASS SAFETY SYSTEMS. THE
INSTALLER SHOULD ASSESS THE RISKS AND MITIGATE AGAINST THEM.
IF YOU HAVE ANY QUESTIONS OR QUERIES OF ANY NATURE WHATSOEVER PLEASE CONTACT THE SUPPLIER
WHO WILL BE PLEASED TO ADVISE AND ASSIST.
Operating Instructions: Single Action Escape Release
Head & Handle
1
Gard
p
r
o
p
r
o
Actuators

Summary

Product Description and Features

Escape Release Head Features

Details the features of the single action escape release head, including intuitive operation, lock-out, and retention force.

Options and Ordering Information

Lists available product configurations, part numbers, and handling options for escape release heads and handles.

Technical Specifications and Safety Functions

Technical Specification Details

Provides detailed technical specifications for materials, performance, environment, and certifications of the escape release system.

Escape Release Head Safety Functions

Outlines the safety functions performed by the escape release head assembly, linked to specific part numbers.

Escape Release Handle Safety Functions

Details the safety functions provided by the escape release handle, correlating with specific part numbers.

Product Functionality Explained

Explains the operational aspects of escape release opening, closing, and locking mechanisms.

Visual Documentation for Installation

Dimensional Drawings of Components

Presents detailed dimensional drawings for the escape release head and handle components.

Mounting Drawings and Angular Offsets

Illustrates mounting configurations and shows allowable angular offsets for installation of the escape release.

1:1 Scale Mounting Hole Positions

Provides a 1:1 scale drawing for accurate mounting hole positioning for escape release heads and handles.

Installation and Commissioning Guide

Tools and Fixings Required

Lists the necessary tools and fixings required for the installation of the escape release system.

Mounting the Escape Release Head

Step-by-step guide for mounting the escape release head assembly onto the machine guard.

Mounting the Escape Release Handle

Instructions for mounting the escape release handle to extruded sections or plates/guards.

Handing Change for EI Handle

Explains the procedure and requirements for changing the handing configuration of the EI handle.

Resetting Escape Release Heads

Details the steps for resetting the escape release head for 16/17 and A6/A7 type heads.

Mechanical Commissioning Steps

Provides essential steps for mechanical commissioning and testing of the installed guard locking device.

Service, Disposal, and Precautions

Service and Inspection Guidelines

Guidelines for regular service and inspection to ensure reliable and lasting operation of the escape release.

Disposal Information

Information regarding the proper disposal of the interlock device as industrial waste.

Liability and Environmental Protection

Covers conditions voiding liability and protection measures against environmental influences.

Halma Fortress amGardpro Specifications

General

Category	Locks
Security Level	High
Shackle Diameter	Not Applicable
Shackle Length	Not Applicable
Lock Type	Interlock