Need help?Do you have a question about the Halo ELITE2B and is the answer not in the manual?
Essential safety warnings, pre-assembly checks, and battery requirements for safe operation.
Lists the specific tools needed to assemble the griddle.
Attaches the left outer leg using M6 screws and installs the leg cap.
Attaches the left inner leg using M6 screws and installs the leg cap.
Joins the left outer and inner leg assemblies with brackets and screws.
Attaches the right inner leg using M6 screws and installs the leg cap.
Attaches the right outer leg using M6 screws and installs the leg cap.
Joins the right outer and inner leg assemblies with brackets and screws.
Secures the tank retention support bracket and rear brace with screws.
Installs tank retention wire, front panel, and rear brace assembly.
Attaches locking casters to front legs and swivel casters to rear legs.
Attaches the fire chamber assembly and inserts the AA battery.
Secures the fire chamber assembly to the main cart frame.
Attaches control knobs and inserts the leveler into the housing.
Secures the lid handle assembly using screws and bezels.
Mounts the griddle plate onto the fire chamber using hook handles.
Attaches side table brackets, tables, and hook handles.
Installs the grease cup with its cover.
Mounts the swing-away warming rack following specified steps.
To Next Page
General