Need help?Do you have a question about the Halo ELITE4B and is the answer not in the manual?
Review essential safety precautions to prevent injury during assembly and use.
Ensure all parts are present before assembly; contact customer service for missing items.
Access online resources like assembly videos, care guides, and warranty information.
Note that a single AA battery is required for the igniter and is not included.
Install left inner and outer legs, including leg caps and brackets.
Install right inner and outer legs, including leg caps and brackets.
Secure the tank support bracket and rear brace with screws.
Assemble tank retention, front panel, and rear brace with screws.
Mount locking casters to front legs and swivel casters to rear legs.
Attach the electronic igniter module and foot brackets to the griddle.
Secure the fire chamber assembly to the 'X' frame using knobs.
Install control knobs and insert the leveler into the housing.
Fasten the lid handle assembly using M6 x 14 mm screws.
Mount the griddle plate using 'JJ' hook handles.
Attach side table brackets and install the left and right side tables.
Attach the grease cup and its cover.
Mount the swing-away warming rack following the provided steps.
Access product registration, assembly videos, recipes, and more via a quick link.
Review essential safety precautions to prevent injury during assembly and use.
Ensure all parts are present before assembly; contact customer service for missing items.
Access online resources like assembly videos, care guides, and warranty information.
Note that a single AA battery is required for the igniter and is not included.
Install left inner and outer legs, including leg caps and brackets.
Install right inner and outer legs, including leg caps and brackets.
Secure the tank support bracket and rear brace with screws.
Assemble tank retention, front panel, and rear brace with screws.
Mount locking casters to front legs and swivel casters to rear legs.
Attach the electronic igniter module and foot brackets to the griddle.
Secure the fire chamber assembly to the 'X' frame using knobs.
Install control knobs and insert the leveler into the housing.
Fasten the lid handle assembly using M6 x 14 mm screws.
Mount the griddle plate using 'JJ' hook handles.
Attach side table brackets and install the left and right side tables.
Attach the grease cup and its cover.
Mount the swing-away warming rack following the provided steps.
Access product registration, assembly videos, recipes, and more via a quick link.
To Next Page
General