Halo Versa 16 User Manual

QUICK START GUIDE
Assemble clean out tray and insert pizza stone
5
a) Insert clean out tray. b) Install pizza stone tray assembly. (Note: make
sure to rotate pizza stone assembly to engage motor socket). c) Insert
pizza stone.
a) Inserte la bandeja de limpieza. b) Instale el conjunto de la bandeja de piedra de pizza.
(Nota: asegúrese de girar el conjunto de piedra de pizza para enganchar el zócalo delmotor).
c) Insertar piedra de pizza.
a) Insérez le plateau de nettoyage. b) Installez l’assemblage du plateau de la pierre à pizza
(REMARQUE: assurez-vous de faire tourner l’assemblage de la pierre à pizza pour engager la
douille du moteur). c) Insérez la pierre à pizza.
Connect the on/off switch cable (white) to the motor and power
cord of the AC/DC adapter (black) or insert two D batteries.
Insert one AA battery into the igniter housing.
4
Conecte el cable del interruptor de encendido/apagado (blanco) al motor y al cable de
alimentación del adaptador AC/DC (negro) o inserte dos pilas D. Inserte la batería AA en la carcasa
del encendedor.
Connectez le câble de l’interrupteur marche/arrêt (blanc) au moteur et au cordon d’alimentation
de l’adaptateur CA/CC (noir) ou insérez deux piles D. Insérez une pile AA dans le boîtier de
l’allumeur.
Montar bandeja limpia e insertar piedra de pizza
Assemblez le plateau de nettoyage et insérez la pierre à pizza
Secure straps prior to use.
Asegure las correas antes de usarlas.
Model No: HZ-1004-ANA
Guía de montaje
Guide de montage
Fixez les sangles avant l’utilisation.
Adaptateur secteur

Halo Versa 16 Specifications

General

Brand	Halo
Model	Versa 16
Category	Kitchen Appliances
Language	English

Summary

Connect Power and Igniter

Connect AC/DC Adapter or Batteries

Connect the on/off switch cable to the motor and power cord of the AC/DC adapter or insert two D batteries.

Insert AA Battery for Igniter

Insert one AA battery into the igniter housing.

Assemble Pizza Stone Tray and Stone

Insert Clean Out Tray

Insert the clean out tray.

Install Pizza Stone Tray Assembly

Install the pizza stone tray assembly to engage the motor socket.

Insert Pizza Stone

Insert the pizza stone into the assembled tray.

General Safety Warnings

Handle Components with Care

Handle all components with care to avoid accidental injury.

Assembly Preparation

Remove Pizza Stone Tray and Packaging

Remove pizza stone tray assembly and all packaging materials.

Check Parts Before Assembly

Ensure all parts are present before assembly. Contact service for missing parts.

Attach Legs and Knob

Attach Legs

Attach the legs using eight M6 screws.

Attach Knob

Attach the knob.

Install Motor

Install Motor with Screws

Install the motor using four M6 screws.