Hama 30 - Retrieving Recorded Material; Save Button Function

To Next Page

To Previous Page

9.3.6 Date/time

• Navigate to the Date/time menu item and conrm your selection by pressing [OK](7). Anew

overview window opens.

• Use the navigation buttons [◄](9) /[►](5) to set the year and conrm your entry by pressing [OK](7).

• Afterwards, adjust the following information in succession following the same procedure: month,

day,time.

• Conrm your selection by pressing [MENU](8).

9.3.7 Version

• Navigate to the Version menu item and conrm your selection by pressing [OK](7). Anew

overview window opens.

• The current cameraversion is displayed.

10. Retrieving the recorded material

Note

Do not remove the microSD cardwith the Dashcam switched on. This can result in data loss or cause

damage to the device.

• Switch off the Dashcam as described in 7.2 Switching on/off.

• Remove the camera’smicroSD card.

• Connect the microSD cardtoyour PC using the SD cardreader(included in delivery).

• Transfer the stored data to your PC to free up space on the memory card.

11. Save button

Note

In the event of an accident, the administering of rst aid and the safety of all involved have priority.

To be sureyour data is permanently stored, proceed as follows:

• Press the Save button (13). Auf dem Display erscheint appears on the display.

• Press and hold Power [ ](10) for about 3seconds to switch off the camera.

• Now remove the camera’smicroSD card.

Note

• Videos stored after pressing the Save button arestored under the designation ‘LOKXXXXX’.

• Normal video les arestored under the designation ‘REC’ and aconsecutive number.