4
Display Searching for the DCF signal
Display ashing
Active
Display steady
Successful -signal reception
Not displayed Inactive –nosignal reception
Note –Cancellation of search process
• The search for the DCF signal can be cancelled by pressing the +/RCC button (10).
• Then set the time and date as described in 5.2 Manually setting the date/
time.
• Asearch for aDCF signal is nonetheless carried out daily (between 1amand 5
am) in order to update the time and date. If the signal is received successfully,the
time and date areautomatically overwritten.
Note –Time settings
• If,during initial setup of the device, no DCF radio signal is received within the rst
few minutes, the search is aborted. The radio icon (6) will go out.
• If thereare reception problems, we recommend leaving the clock to sit overnight,
since interference is generally less at night.
• In the meantime, you can start amanual search for the DCF radio signal at
another location or you can manually set the time and date.
•The clock automatically continues to search for the DCF signal on adaily
basis (at 1amand 5am). If the signal is received successfully,the manually
set time and date areoverwritten.
To Next Page
Loading...
Need help?
General
