7
•Press the +/RCC button (10) or the -/°C/°F button (11) to select the hour
for the alarm time, and conrm your selection by pressing the ALARM
button (8). The minutes display begins to ash.
•Repeat the process to set the minutes for the alarm time.
•Press the ALARM button (8) repeatedly to go back to the time display.
•If you do not make an entry for 20 seconds, the device automatically exits
the settings mode and the settings you made are saved.
Activating/deactivating the alarm clock
•Press the Alarm button (8) repeatedly to activate/deactivate the alarm time.
•If the alarm is activated, the corresponding symbol
is displayed.
Stopping the alarm clock/snooze function
•If the alarm is triggered, an alarm signal will sound for 2 minutes. The
frequency of the alarm signal increases the longer the alarm continues.
•Press the ALARM button (8) to stop the alarm.
Note – Snooze function
•While the alarm signal is sounding, press the SNOOZE/LIGHT button (12)
to activate the snooze function.
begins to ash on the display. The alarm signal will be stopped for 10
minutes, after which it will sound again.
5.4. Temperature indicator
•Press the -/°C/°F button (11) to choose between °C and °F for the
temperature display.
To Next Page
Loading...
Need help?
General
