42
The radio automatically saves all successful network connections (proles). This means that re-
establishing these connections (for example, after the radio was disconnected from the power supply)
does not require you to re-enter the network access information.
To remove individual network proles, select the corresponding network prole and conrm the selection
and subsequent prompt with .
A prole that is currently active cannot be deleted.
All previously saved congurations are deleted after conrmation.
• This setting is a radio energy-saving function.
• If this function is inactive (NO #), the network module will be switched off whenever the radio is not
actively using the network connection (e.g. in standby mode/DAB reception).
• This means the radio will not be accessible via the network from your PC, smartphone or tablet.
• You must activate this menu item (YES #) if you want to use streaming or control functions via the app.
This function is deactivated by default.
To Next Page
Loading...
Need help?
General
